ACTI-Mag corrected pH in acid winery waste, without increasing salinity and improved safety standards at vineyards in NSW, Australia.

case study summary

Challenges
  • Sustainable operation of a woodlot using winery wastewater and keeping within pH & salinity limits.
  • Finding a safe and cost effective alternative to ammonia for pH control.
Objectives
  • To correct pH in acid winery waste, without increasing salinity.
  • Improve safety standards.
Solution

ACTI-Mag Logo

Download Success story

Calix introduced ACTI-Mag to a winery in Morquong NSW, as a safe and cost-effective alternative to ammonia for pH adjustment in wastewater.

ACTI-Mag is a highly stable slurry, that flows readily and can be easily dosed in winery wastewater treatment systems.

Download the PDF Now

Introduction

 

 

Situated in the Southern Murray Darling Region of Australia, this winery operates over 2400 hectares of vineyards, as well as a large scale winery. Their production is sold to domestic and global wine businesses as well as bottled into the company’s own branded product.

This winery is a firm advocate for sustainable wine production through a range of initiatives which deliver both financial and environmental benefits for the business.

They seek to assist in reversing agriculture’s adverse contribution to Australia’s environment by applying regenerative and sustainable farming practices to improve soil health and increase biodiversity.

The healthy soils lead to increased moisture and nutrient retention which creates resilience to harsh climatic events. The increased microbial diversity improves air flow and limitscarbon respiration back into the atmosphere.

CHALLENGES

 

The irrigation of winery effluent onto woodlots is a common practice in Australian wineries. This waste stream is typically acidic, particularly during the vintage processing period, requiring alkali dosing before discharge.

The widespread use of caustic (sodium hydroxide) or potassium caustic (potassium hydroxide) for Clean-in-Place (CIP) systems within wineries, contributes a significant salt load to the effluent stream. This means neither are good choices for winery effluent pH correction.

To avoid the addition of salinity, the winery was using direct injection of anhydrous (gaseous) ammonia at their Buronga Winery.

However, this requires the management of a pressurised gas that is flammable, toxic, causes severe burning to eyes, skin & the respiratory tract and is also potentially hazardous to aquatic life.

The winery was not comfortable with this and were looking for an environmentally friendly alternative.

 

SOLUTION

 

 

The winery readily agreed to a trial to start dosing ACTI-Mag during the 2020 Vintage (from March to late May 2020).

ACTI-Mag is a highly reactive slurry of magnesium hydroxide Mg(OH)2. ACTI-Mag is produced by Calix – using its uniquely high surface area magnesium oxide (MgO) as a 60% solids water-based slurry. The magnesium hydroxide solids in the slurry have a low solubility and high surface area allowing it to flow easily.

ACTI-Mag also provides more CaCO3 equivalent alkalinity, on an equal weight basis when compared to caustic soda, which lowers chemical consumption. With a pH of around 10.3 compared to a pH of 14 for 50% caustic soda (NaOH), ACTI-Mag provides greater than 60% more alkalinity than caustic soda.

This lower pH also means ACTI-Mag can be handled safely. It is non-hazardous and non-corrosive, with minimal personal protective equipment (PPE) required. Magnesium hydroxide, also known as ‘milk of magnesia’, is a common component of antacids, which further highlights the safety of the product.

On the contrary, anhydrous ammonia is a gas which has to be dissolved to become a useful alkali. The ammonia gas must be contained, as any leak is toxic and corrosive. It is usually sparged into a recirculation line to dissolve it. This can cause a lot of vibration and noise as it violently
reacts and dissolves.

They were very happy with the performance of ACTI-Mag for pH correction and felt far more comfortable with handling a safe alkali.

We can help you review and optimise your wastewater process to make sure your system is running smoothly and cost effectively.

Calix leverages a culture of innovation to provide fully customised services such as design, engineering, installation, piping and commissioning services to provide turnkey systems for chemical dosing.

Download the Solution Spec Sheet

Looking for a safety data sheet (formerly known as MSDS)?

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe

Subscribe to our newsletter

Subscribe to receive our latest updates, news and quarterly newsletter.