Project LEILAC Update July 2021

Project LEILAC Update July 2021
Project LEILAC Update July 2021

What is the LEILAC-1 project, and why was it successful?

The LEILAC-1 project involved the construction of a pilot plant at the HeidelbergCement plant in Lixhe, Belgium. Extensive research, development and engineering was necessary to design and construct the first-of-a-kind pilot – involving the dedicated, flexible, and professional inputs from all the project’s partners: Calix, Heidelberg Cement, CEMEX, Tarmac, Lhoist, ECN (part of TNO), Imperial College, Quantis, PSE, Solvay and the Carbon Trust.

This enabled the construction of the pilot on time and on budget in 2019. Additionally, studies examining integration of the plant in different configurations, and confirmation of the sustainability of the process have also been conducted by Imperial, PSE, Quantis and the Carbon Trust.

Several challenges were faced in getting the system to run, particularly the burners, feed and conveying systems. These were gradually overcome, and with system becoming increasingly stable over the latter part of the test run campaign.

The project has successfully demonstrated that both limestone and raw meal can be processed; that the CO2 is successfully separated; and that (disaggregated from the entire system) the energy penalty for indirect calcination (LEILAC) is not higher than direct (conventional) calcination.

Other major findings are that there has been no build-up of material on the reactor’s wall; that the reactor (despite the numerous runs) is exhibiting no significant negative operational deterioration; that there have been no negative impacts on the host plant, and no impact on clinker production; and that the pilot is safe and easy to operate, with no safety incidents.

Thanks go to all the staff at Lixhe, service providers, and consortium members tirelessly working during the massive complications arising from the pandemic.

Official opening of the LEILAC-1 pilot facility in May 2019


While a follow-on project – LEILAC-2 – has started, awarded with €16m funding from the EU Horizon 2020 program and additional industry contribution, a lot more is still to happen at the LEILAC-1 site.

Several steps are currently in train to improve the throughput and calcination rates, including:

Improvements to the natural gas burners used, enabling the furnace to reach its design capacity;

Installation of a pre-heat stack to increase the usable length of reactor for calcination – further improving throughput and calcination rates and replicating integration with a host plant.

Removal of the lime cooler to install a simpler return system and improve throughput rates

Once tested and scaled up, (LEILAC Low Emissions Intensity Lime And Cement) technology should provide an option for reducing the costs of carbon capture and accelerate the deployment in both industries, enabling society to continue to benefit from these vital products without negatively impacting the environment.

LEILAC (Low Emissions Intensity Lime And Cement) is a European Union Horizon 2020 (H2020) research and innovation project.

Calix’s technology is being piloted with the world’s largest cement and lime companies to mitigate their carbon dioxide (CO2) emissions dramatically without significant energy or capital penalty.

Find out more about project LEILAC

Did you know?

Concrete is the most widely consumed manmade material on Earth, used in buildings, roads, bridges and other types of infrastructure. Portland cement, concrete’s common binding agent, makes up just 10-15% of the material’s mass but accounts for 80-90% of its emissions. Because of the scale at which it is used in our modern world, and how emissions intensive it is to produce cement, it is a top source of climate pollution, responsible for about 25% of all industrial emissions of carbon dioxide (CO2) and roughly 7-8% of global CO2 emissions.

Every possible decarbonisation option needs to be urgently developed and deployed. In order to reach the required emissions reductions by 2050, carbon capture will need to be applied to a vast majority of cement and lime kilns.

Contact us Calix Limited

We are on a mission to help solve some of the greatest global challenges.

Project LEILAC Update July 2021


Subscribe to our newsletter

Subscribe to receive our latest updates, news and quarterly newsletter.